Refurbishing
Budgetary cost of repairs of Electrical,Electronic Measuring Instruments, Equipments
Digital panel meters AE, Meco, Agronic etc. |
Rs. 300/- | |
Analogue multimeters Motwane, Simpson etc. | Rs. 500/- | |
Digital multimeters/ Clamp testers Meco, Motwane, Lutron, Rishabh etc. |
Rs. 400/- | |
Insulation testers / Earth testers Shanti, Meco, Waco, Cie, Evershed etc. |
Rs. 400/- | |
Digital ph/ Conductivity / TDS meters Toshniwal, Elico, Systronics, Agronic etc. |
Rs. 400/- |
1)Above charges are budgetary only for normal defects including replacement of defective parts costs of same not exceeding Rs. 100/-
2) Replacement exceeding Rs.100/- & major repairs if any shall be intimated to you on physical assessments of instruments at our works.
3) Calibration certificate traceable to NATIONAL STANDARDS confirming to ISO-9000 shall be issued at an extra cost.
Vernier calipers
(A) Job: Removal of gaps between outer/inner jaws without any material deposition.
Range | Ordinary | Dial Type | Digital |
150 mm | Rs. 400/- | Rs. 450/- | Rs. 600/- |
200mm | Rs.450/- | Rs.500/- | Rs.750/- |
300mm | Rs. 550/- | Rs. 600/- | Rs. 900/- |
450 mm | Rs. 900/- | - | - |
600 mm | Rs.1200/- | - | - |
1000mm | Rs.1400/- | - | - |
These charges are only for removal of gaps and replacement of parts like gib slider (brass strip), screws etc. shall be extra. If vernier is showing minus reading at zero it would need material deposition which shall be charged extra.
(B) Job: Normal repairs & Servicing.Dial Calipers
L.C. - 0.05 mm. | Rs. 250/- |
L.C. - 0.02 mm. | Rs. 350/- |
L.C. - 0.01 mm. | Rs. 450/- |
Micro meters
Normal Repair & Servicing | Rs. 100/- |
Freeing locked micrometer | Rs. 300/- |
Replacement of lock | Rs. 150/- |
Replacement of Ratchet | Rs. 150/- |
Dial Gauges
10mm, L.C. :0.01 | Rs. 250/- |
Lever Dials | Rs. 400/- |
Bore Gauges | Rs. 400/- |
Height Gauges | Rs. 500/- |
Rubber Hardness Testers | Rs. 250/- |
[We also repair digital instruments of above types]
Note: -
1) Above charges are budgetary only for normal defects including replacement of defective parts costs of same not exceeding Rs. 100/-
2) Replacement exceeding Rs.100/- & major repairs if any shall be intimated to you on physical assessments of instruments at our works.
3) Calibration certificate traceable to NATIONAL STANDARDS confirming to ISO-9000 shall be issued at an extra cost.
Specialized reclaiming of broken Vernier Calipers
By specialised technique we join broken jaws/parts of Vernier calipers. We reclaim vernier calipers without disturbing metallurgy of parent material. Original accuracy of measurement is assured by proper machining/grinding on CNC machines. Calibration certificate traceable to national standard is issued after repairs. Facilities approved by ABB, BHEL, L&T, Crompton, IPCL, NTPC, Railways, ONGC, IOCL etc.